Ethernet Router / BridgeUser Manual Version 1.0
Table Of Contents
- VERSION CONTROL
- INTRODUCTION
- SPECIFICATION
- TECHNOLOGIES
- DESCRIPTION OF THE DEVICE
- MECHANIC DESIGN
- EQUIPMENT INSTALLATION
- PROGRAMMING GUIDE
- Introduction
- Main menu of the bridge mode
- Main menu of the router mode
- FIRMWARE LOADING
- TECHNICAL SPECIFICATIONS
- CONNECTORS’ DESCRIPTION
- DESCRIPTION OF INTERFACE CABLES
- DELIVERY SET
- GLOSSARY
- EXAMPLE OF NETWORK CONFIGURATION
The units have all the possibilities for monitoring and management. Different management
protocols that are used in the firmware of the family allow one to implement:
1. local management using a computer, which supports the VT 100 type emulation of the
terminal;
2. remote monitoring and configuring over Telnet protocol;
3. remote monitoring and configuring over HTTP protocol;
4. support of the CMU SNMP-agent for remote monitoring and configuring while working as
a part of sophisticated networks under Simple Network Management Protocol (SNMP).
The use of Flash-memory chips as read only memory (ROM) facilitates the loading of new
firmware versions.
Version: 1.0 Page. 7 of 95