Ethernet Router / BridgeUser Manual Version 1.0
Table Of Contents
- VERSION CONTROL
- INTRODUCTION
- SPECIFICATION
- TECHNOLOGIES
- DESCRIPTION OF THE DEVICE
- MECHANIC DESIGN
- EQUIPMENT INSTALLATION
- PROGRAMMING GUIDE
- Introduction
- Main menu of the bridge mode
- Main menu of the router mode
- FIRMWARE LOADING
- TECHNICAL SPECIFICATIONS
- CONNECTORS’ DESCRIPTION
- DESCRIPTION OF INTERFACE CABLES
- DELIVERY SET
- GLOSSARY
- EXAMPLE OF NETWORK CONFIGURATION
Password change
> manage> setpass
Old Password:****
New Password(press ENTER to disable):******
Confirm password again:******
Password has been changed
Saving configuration...
Configuration saved.
> manage>
Command format: setpass
Parameter: none.
Definitions:
Old Password: Enter the old password.
New Password (press
Enter to disable):
Enter the new password.
Confirm password
again:
Confirm the password again.
Password has been
changed:
The password has been changed.
Information line.
Saving
configuration…:
The new configuration is saved
automatically after the dialogue is
finished.
Password disablement
manage> setpass
Old Password:******
New Password(press ENTER to disable):
Are you sure to disable password(y/n)?y
Password has been changed
Saving configuration...
Configuration saved.
> manage>
Command format: setpass
Parameter: none.
Definitions:
Version: 1.0 Page. 51 of 95
Old Password: Enter the old password
New Password (press
Enter to disable):
Press “Enter” to disable the password.