December 2009 LBPD01A-KIT VDSL2 PoE Ethernet Extender Kit, PD Extend Ethernet with 100-/60-Mbps downstream/ BLACK BOX upstream connections over copper. ® Kit includes two extenders—one with standard power and one that’s a PoE powered device (PD). Bridges 10BASE-T/100BASE-TX Ethernet interface. Supports DSL connection up to 4000 feet (1219 m). Select from Fast and Interleaved modes. Provides low latency for video/voice/data applications. IEEE 802.3af PoE compliant.
VDSL2 PoE Ethernet Extender Kit, PD Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
VDSL2 PoE Ethernet Extender Kit, PD Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben ser seguidas. 5.
CE Statement European Community (CE) Electromagnetic Compatibility Directive This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN61000-3 and the Generic European Immunity Standard EN55024. EMC: EN55022(2003)/CISPR-2(2002): Class A IEC61000-4-2 (2001): 4 KV CD, 8 KV AD IEC61000-4-3(2002): 3 V/m IEC61000-4-4(2001): 1 KV (power line), 0.
VDSL2 PoE Ethernet Extender Kit, PD 1. Specifications........................................................................................................................................................................................... 7 2. Overview.................................................................................................................................................................................................. 8 2.1 Introduction............................................
Chapter 1: Specifications 1. Specifications Data Rate (Maximum): 100/60 Mbps Transmission Distance (Maximum): 4000 ft. (1219 m) Flow Control: Half-/full-duplex MDI-X: Automatic Standards: ITU-T G.993.1/2, SG15Q4 DMT compliant, trellis code with 1024 DMT bins, EMI emissions compliant, FCC Class A, CE, IEEE 802.3/IEEE 802.3u Ethernet, 10BASE-/100BASE-TX, IEEE 802.
VDSL2 PoE Ethernet Extender Kit, PD 2. Overview 2.1 Introduction The LBPD01A-KIT is a VDSL LAN Extender that provides broadband transmission rates up to 100-/60-Mbps for downstream/ upstream over single-pair copper line for point-to-point Ethernet connectivity. The kit includes two extenders—one with standard power and one that’s a PoE powered device (PD).
Chapter 2: Overview 2.4 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500. • (1) VDSL2 PoE Ethernet Extender (PD) • (1) VDSL2 PoE Ethernet Extender (Standard) • (1) 5-VDC, 1-A power adapter for VDSL2 PoE Ethernet Extender (Standard) • This user’s manual on CD-ROM 2.5 LED Descriptions Table 2-1. LED indicators. LED Color Function POWER Green Lights when power is on.
VDSL2 PoE Ethernet Extender Kit, PD 2.6 Front and Back Panels Figures 2-2 through 2-5 show the extenders’ front and rear panels. DIP Switches LED Indicators Figure 2-2. Front panel, VDSL2 PoE Ethernet Extender (PD), PD unit. RJ-11 Connector RJ-45 Connector Figure 2-3. Rear panel, VDSL2 PoE Ethernet Extender (PD), PD unit. DIP Switches LED Indicators Figure 2-4. Front panel, VDSL2 PoE Ethernet Extender (PD), Standard unit. Power Input RJ-11 Connector RJ-45 Connectors Figure 2-5.
Chapter 3: Installation 3. Installation Because the VDSL2 PoE Ethernet Extenders are preconfigured for basic applications, you can install them quickly. Follow these steps: 1. Connect the line interface between the units with RJ-11 cable. 2. Connect the Standard Extender to a twisted-pair Ethernet connection. Connect the PD Extender to a PoE PSE switch or other PSE device using copper twisted-pair cable.
VDSL2 PoE Ethernet Extender Kit, PD 4. DIP Switches Table 4-1 describes the DIP Switches. Select the switches for optimal configuration. Table 4-1. DIP switches and their functions. DIP Switches SW-1 SW-2 SW-3 SW-4 Definition Master/Slave Impulse Noise Protection Mode Data Rate SNR Off Master Interleaved 50/20 Mbps 9 dB On Slave Fast Full Rate 6 dB Standard extender PD extender Figure 4-1. DIP switches’ default settings. Table 4-2. DIP switches’ descriptions.
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less. © Copyright 2009.
