User`s manual

724-746-5500 | blackbox.com

Page 15

Chapter 3: Installation

3.3 Installing the Hardware

Follow these steps to install the adapter:

1. Plug one end of the DVI cable into the adapter’s DVI connector, and the other end of the DVI cable into a monitor’s DVI

connector.

NOTE: To connect different types of monitors, you may need an adapter. Contact Black Box Technical Support at 724-746-5500 or

info@blackbox.com.

2. Plug the micro USB connector into the adapter’s micro USB connector and the other end into a PC.

Figure 3-14. Typical installation.