User`s manual

724-746-5500 | blackbox.com
Page 14
724-746-5500 | blackbox.com
Chapter 3: Installation
4. Connect the USB 3 to DVI Adapter to a computer after the driver installation is completed. For connection details, refer to
Section 3.3.
5. When the operating system detects the adapter, the reminder message will appear on the system tray as below.
Figure 3-12. Display found screen.
6. To change the status of display mode, position the mouse anywhere on the Windows desktop, and then right-click to select
“Properties.”
7. Click on the “Settings” tab to enter the configuration page.
3.2 Verifying the Driver
To verify the adapter’s driver, follow the steps below to open the Device Manager on a Windows operating system.
1. Follow the path as below to open the device manager:
• Windows 8: Control Panel—>Device Manager
• Windows 7: Control Panel—>System and Security—>System—>Device Manager
• Windows Vista: Control Panel—>System Maintenance—>Device Manager
• Windows XP: Control Panel—>System—>Hardware—>Device Manager
2. A string similar to USB Adapter device should be listed.
Figure 3-13. Windows 7 screen.
NOTE: If a question mark or exclamation mark appears in the screen next to the item, then the driver is not properly installed.
Delete the item, unplug the adapter, and repeat the installation steps.