Specifications

Page 17
UCCDM20-T
724-746-5500 | blackbox.com
Chapter 4: Configuration and Setup
4. Configuration and Setup
Remove and discard all packaging materials and then lock the lockable casters.
Open and inspect the Cart to verify all doors, locks, and casters are working properly.
Do not plug the Cart into a wall outlet until all configurations and setup are
complete.
4.1 Installing the Handle
The handle/cord wrap installs on the side of the cart with the locking swivel casters.
NOTE: The casters swivel on one side of the Cart and are fixed on the other. Consider
maneuverability options before installing the handle.
Step 1: Locate the side of the cart with the locking swivel casters.
Step 2. Place the handle so that the holes in the brackets are aligned with the
threaded holes in the side panels.
Phillips-head
screws
Handle
Phillips-head
screws
Figure 4-1. Handle assembly.
Step 3. Using a Phillips-head screwdriver, tighten four of the Phillips-head screws into
the threaded holes.