Specifications

APPENDIX A: NVRAM Factory Defaults

Appendix A: NVRAM Factory

Defaults

The table below shows, for the ServSwitch’s saveable options, the default values

stored in nonvolatile memory (NVRAM) when the ServSwitch is shipped from the

factory. It also shows what commands or actions can change these settings for the

ServSwitch’s current operating period, as well as what commands or actions can

save changed settings to NVRAM, so that they become the new defaults.

Option Factory-Default To Change To Save

Setting Changes

Caps/Scroll/ Num Lock ON (fixed) Select port, then press the Can’t be saved

Num Lock corresponding button on

the keyboard

Scan OFF Push the SCAN button on Can’t be saved

the ServSwitch or type

[CTRL] S (to turn ON) or

[CTRL] X (to turn OFF)

Scan-Delay 5 seconds Type [CTRL]Txx[ENTER] [CTRL] K

Time (xx=any 1- or 2-digit number,

time in seconds)

Screen Saver’s OFF (disabled, set to Type [CTRL]Vxxx[ENTER] [CTRL]K

Delay Time zero) (xxx=any 1- to 3-digit number,

time in seconds)

Keyboard Mode Mode 2 Select port, then type [CTRL]K

[CTRL]Mx (x=1, 2, or 3)

Units 0 (no submasters) Type [CTRL]Uxxx[ENTER] [CTRL]K

(xxx=0 to 255)

Keyboard 43 (delay or

⁄2 second, Type [CTRL]Axxx[ENTER] [CTRL]K

Typematic rate of 10.9 characters (xxx=0 to 127; see

per second) Section 4.3.11)