Specifications

18
“R2” SERVSWITCH
3.2.5 S WITCHING FROM THE K EYBOARD
Your ServSwitch is now ready for operation using its default settings. To take full
advantage of the switch’s features, refer to Chapter 4, which gives detailed
information about each of the ServSwitch commands, describing each command’s
function and keystroke sequence. For your convenience, this information is
summarized in Section 4.2. To begin switching immediately, however, just press
and release your keyboard’s left Control Key ([CTRL]), then—within the next two
seconds—type in your desired port number with the regular number keys (not the
numeric keypad).