User`s guide

CHAPTER 5: Configuration
65
5.7.4.2. Linux Operators and Wild Cards
In addition to merely entering a specific IP address or partial IP address in the Allow
or Deny list, you may also use any standard Linux operator or wild card. In most
cases, the only operator used is “EXCEPT” and the only wild card used is “ALL,”
but more experienced Linux users may note that other operators and wild cards may
also be used.
EXCEPT:
This operator creates an exception in either the “allow” list or “deny” list.
For example, if the Allow list includes a line which reads “192. EXCEPT
192.255.255.6,” then all IP address that begin with “192.” will be allowed; except
192.255.255.6 (providing that this address appears in the Deny list.)
ALL:
The ALL wild card indicates that all IP Addresses should be allowed or denied.
When ALL is included in the Allow list, all IP addresses will be allowed to connect;
conversely, if ALL is included in the Deny list, all IP Addresses will be denied
(except for IP addresses listed in the Allow list.)
For example, if the Deny list includes a line which reads “ALL EXCEPT
168.255.192.192,” then all IP addresses except 168.255.192.192 will be denied
(except for IP addresses that are listed in the Allow list.)
Net/Mask Pairs:
An expression of the form “n.n.n.n/m.m.m.m” is interpreted as a “net/mask” pair. A
host address is matched if “net” is equal to the bitwise AND of the address and the
“mask.”
For example, the net/mask pattern “131.155.72.0/255.255.254.0” matches every
address in the range “131.155.72.0” through “131.155.73.255.”