User`s guide

SECURE SITE MANAGERS
56
IP Security
As described in Section 5.7.4, the IP Security function allows you to restrict
command mode access based on the user’s IP address. In the Text Interface, IP
Security parameters are defined via item 5 in the Network Configuration menu
(Figure 5-9.) In the Web Browser Interface, these parameters are found by clicking
the Network Configuration link, and then Clicking the IP Security link. In the
default state, IP Security is disabled.
Static Route
The Static Route menu allows you to type in Linux routing commands that will be
automatically executed each time that the unit powers up or reboots. In the Text
Interface, the Static Route menu is accessed via item 6 in the Network Configuration
menu. In the Web Browser Interface, the Static Route menu is accessed by first
clicking the Network Configuration link and then clicking the Static Route link.