User`s guide

SECURE SITE MANAGERS
104
13.2. Command Summary
Function Command Syntax
Command Availability
Supervisor Non-Super.
Resident Disconnect
^X
X X
Display Audit Log
/A [search text] [Enter] X
Connect /C <x> [x] [Enter] X
X
Copy RS232 Port Parameters /CP [Enter]
/CP [x,y,z] [Enter]
/CP [x-z] [Enter]
X
Third Party Disconnect
/D[/Y] <x> [x] [Enter]
/D[/Y] * [Enter]
/D Nn [Enter]
X
Erase Buffer
/E[/Y] <x> [x] [Enter]
/E[/Y] * [Enter]
X
Set System Parameters /F [Enter] X
Help Menu /H [Enter] X X
Reboot System (Default) /I [Enter] X
Display Site ID /J [Enter] X X
Send SSH Keys /K <k> [Enter] X
Set Network Port Parameters /N [Enter] X
Set Serial Port Parameters /P <x> [Enter] X
Set Password
/PW [Enter] X X
Read Buffer
/R <n> [Enter] X X
Display Port Status /S [Enter]
X X
Display Port Diagnostics /SD [Enter]
X X
Display Network Status /SN [Enter] X
Test Network Options
/TEST [Enter] X
Send Parameter File /U [Enter] X
Upgrade Firmware /UF [Enter] X
Unlock Port (Invalid Access) /UL [Enter] X
Display Port Parameters (Who) /W [n] [Enter] X
X
Exit Command Mode /X [Enter] X X
 Resident Disconnect: Disconnects your resident port from another port. The disconnect sequence
can be redefined via the Port Configuration Menus.
 A User Port cannot perform a Third Party Connect.
 Third Party Disconnect: Disconnects two or more nonresident ports. Must be issued from a third
port with Supervisor command capability.
 Disconnects a TCP Port, where Nn is the desired Secure Site Manager TCP Port.
 If desired, The /PW command can be disabled via the System Parameters Menu.
 Supervisor Mode displays parameters for all ports; User Mode only displays parameters for ports
allowed by the Port Password.
 A port or account that does not permit Supervisor commands cannot view parameters for other
ports.