Technical data

User’s and Service Guide 43
87050A Option K22 Front Panel
Front Panel
Figure 12 Front Panel Features
Line Power Switch
The test set line POWER switch is located at the bottom left corner of the front panel. See
Figure 12. The line POWER switch turns the power to the test set either on or off.
The front panel line POWER switch disconnects the mains circuits from the mains supply
after the EMC filters and before other parts of the instrument
Ports 1–12
Ports 1 through 12 are 50 Ω connectors that are used to connect to the device under test.
CAUTION Do not input more than 1 Watt maximum RF+DC to these ports or damage to
the internal RF switches or the analyzer may occur.
A i/p 2
50 Ω Connector
B i/p 2
50 Ω Connector
Line Power
Switch
Port Connection
Status
Ground
Connector
Ports 1–12
Aux 1 Aux 2
A i/p 1–4 B i/p 4–1