Technical data

2 User’s and Service Guide
87050A Option K22 Description
Description
The Agilent 87050A Option K22 Multiport Test Set is designed for use with 50 Ω Network
Analyzers, such as the Agilent 8719D/ES, 8720D/ES, and 8722D/ES.
The test set provides single connection, multiple measurements of multiport devices with
up to twelve ports, such as distribution amplifiers, taps, switches and couplers.
Throughput is increased by reducing the number of device reconnects the operator must
perform. Switching is performed with mechanical switches.
The test set can be controlled by using an external GPIB controller or parallel control.
This document will guide you through the steps necessary to correctly and safely install
your multiport test set.
NOTE This User's and Service Guide documents the use of the test set with an
Agilent 8720D only.
Verifying the Shipment
Verify the items received in Table 1.
Inspect the shipping container. If the container or packing material is damaged, it should
be kept until the contents of the shipment have been checked mechanically and electrically.
If there is physical damage refer to "Agilent Support, Services, and Assistance" on page
74. Keep the damaged shipping materials (if any) for inspection by the carrier and an
Agilent Technologies representative.
Table 1 87050A Option K22 Accessories Supplied
Description
Agilent
Part Number
Quantity
Power Cord See Figure 3 on page 6 1
Front Handle Kit 5063-9228 1
Rack Mount Kit 5063-9235 1
Parallel Port Interface Cable 8120-6818 1
RF Cable 8720D (without feet) to A i/p 2 or B i/p 2 08720-20245 2
RF Cable, Option K22 Aux 1/2 to Option K12 08720-20246 2
User’s and Service Guide 87050-90105 1