Specifications

42
SERVSWITCH™ WIZARD
Examples of common hotkey commands (assuming the hotkeys are [Ctrl] and
[Alt]):
• To select channel 2:
Press and hold [Ctrl] and [Alt], press and release [2], release [Ctrl] and [Alt].
• To “tab through” channels:
Press and hold [Ctrl] and [Alt], press and release [Tab] (repeat as many times
as necessary), release [Ctrl] and [Alt].
• To select channel 7 on an 8-port subsidiary Wizard Pro connected to port 4 on a 4-port
master Wizard:
Press and hold [Ctrl] and [Alt], press and release [4], press and release [7],
release [Ctrl] and [Alt].
• To select channel 13 on a subsidiary Duo connected to port 3 on a 4-port master Wizard:
Press and hold [Ctrl] and [Alt], press and release [0], press and release [3],
press and release [1], press and release [3], release [Ctrl] and [Alt].
5.6 Mouse Control
Yet another convenient way to select CPU channels on the ServSwitch Wizard is
through a three-button mouse, if this feature is enabled (see Section 4.2.6). As
shown in Figure 5-3 (button to hold down is black, button to click is gray):
• To switch to the next channel, hold down the central mouse button or “wheel”
button, then click on the left-hand mouse button.
• To switch to the previous channel, hold down the central mouse button or
wheel button, then click on the right-hand mouse button.
Figure 5-3. Using the mouse buttons for switching.
Select next channel:
3-button mouse
Wheel mouse
Select previous channel:
3-button mouse
Wheel mouse