Specifications

24
SERVSWITCH WIZARD PRO
IntelliMouse features are supported on both PS/2 and RS-232 CPU connections.
When you use PS/2 CPU connections, the ServSwitch Wizard Pro will
automatically configure itself to the type of mouse requested by the driver. If you
are using RS-232 CPU connections, you will need to send the [U][4] or [U][5]
command to enable the IntelliMouse features.
U1 Channels are mouse-switchable; the Switch reports “2-button mouse”
to the attached PCs (default)
U2 Channels are not mouse-switchable; the Switch reports “2-button mouse”
to the attached PCs
U3 Channels are not mouse-switchable; the Switch reports “3-button mouse”
to the attached PCs
U4 Channels are mouse-switchable; the Switch reports “IntelliMouse” to the
attached PCs
U5 Channels are not mouse-switchable; the Switch reports “IntelliMouse”
to the attached PCs