Specifications

21
CHAPTER 4: Configuration
4.2.2 S ETTING THE
S CREEN -S AVER T IMEOUT
The ServSwitch Wizard Pro has a programmable screen-saver function which will
blank the display on the shared monitor after a certain time elapses with no activity
on the shared keyboard or mouse. If a password has been set (see Section 4.2.9),
the Switch will also lock itself when it activates the screen saver.
The Switch’s front-panel display will flash while the Switch is in screen-saver
mode. If the switch is locked, you will have to type in the password to unlock it and
deactivate the screen saver; otherwise, simply typing at the keyboard or moving the
mouse will restore the blanked monitor display. Use the “B” command (type [B]
[digit] [Enter]) to set how long the ServSwitch Wizard Pro waits for keyboard or
mouse activity before activating the screen saver:
B1 Screen saver disabled (default)
B2 Screen saver is activated after 1 minute of inactivity
B3 2 minutes
B4 4 minutes
B5 8 minutes
B6 12 minutes
B7 16 minutes
B8 20 minutes