Specifications

54
SERVSWITCH™ AFFINITY
3.5.3 K ERNEL
S ERIAL -P ORT M ESSAGES
The ServSwitch Affinity’s kernel writes this message to the serial port at power-up:
Hit space bar within 5 seconds to get serial options menu
If the unit receives a [Space] character at the serial port during the next 5 seconds,
the standard ServSwitch Affinity initialization terminates after writing the Local
ports diagnostic message (see Section 3.5.1), and a serial options menu appears
as described in Section 7.2.
During a firmware upgrade after a kernel error has occurred, any of the
following messages may appear at the serial port:
• Waiting for file
• Receive successful
• Checksum error
• Record error
• Data error
• Receive failed
• Address =
• Try again ? Y/N
• Error in programming flash
• Please try again