Specifications

19
CHAPTER 2: Introduction
2.3 The Rear Panel Illustrated
All cable connections are made at the Affinity’s rear panel, as illustrated in
Figures 2-1 through 2-3 and described on the following pages.
Figure 2-1. The rear panel of a fully populated regular ServSwitch Affinity
Expansion Chassis (four 1 x 4 Port Cards installed).
Figure 2-2. The same rear panel, slot and port numbering shown.
Figure 2-3. A fully populated Dual-Powered 16-User rear panel, numbering
shown. (8-User units have the top expansion slot, but not the bottom one.)
OUT 1 IN 1 OUT 2 IN 2 OUT 3 IN 3 OUT 4 IN 4
OUT 1 IN 1 OUT 2 IN 2 OUT 3 IN 3 OUT 4 IN 4
5
4
3
2
1
6
SLOTS
4
3
2
1
SERIAL
PORT
CPU 1CPU 2CPU 3CPU 4 KVM 1
CPU 13CPU 14CPU 15CPU 16 KVM 4
CPU 9CPU 10CPU 11CPU 12 KVM 3
CPU 5CPU 6CPU 7CPU 8 KVM 2
POWER
INPUT
POWER INPUT
90-264 VAC 47-63Hz 40 Watts
IN 1OUT 1IN 2OUT 2
5
4
3
2
1SLOTS
4
3
2
1