Specifications

124
SERVSWITCH™ AFFINITY
• To assign the users on Slots 1 through 4 to “KVM 13” through “KVM 16,”
remove JP1 and JP2 on the lower card and set JP1 and JP2 on the upper card
to UP.
We recommend that, unless the placement of your user equipment demands
otherwise, you set the user ports to KVM 1 through 4 on your first 16-User Affinity
chassis, KVM 5 through 8 on your second chassis, KVM 9 through 12 on your third
chassis, KVM 13 through 16 on your fourth chassis, KVM1 through 4 again on your
fifth chassis, and so on.
Figure E-4. User-port-numbering jumpers JP1 and JP2 on an
8-Port Expansion Card.
UP
DOWN
JUMPER ON - BUS
JUMPER OFF - RING
JP2
UP
DOWN
JP1
KVM 1-4 KVM 5-8 KVM 9-12 KVM 13-16
JP1 & JP2
JUMPER
SETTINGS
UPPER CARD
LOWER CARD