Specifications

120
SERVSWITCH™ AFFINITY
Appendix E: Installing Cards in the
ServSwitch Affinity
E.1 Adding a Port Card
Unscrew and remove the blank plate covering the vacant ServSwitch Affinity card
slot that you want to put the card in. (Port Cards can only be installed in the four
Port-Card slots, not the top expansion slot or—on 16-User Affinity chassis—the
bottom expansion slot.) Slide the card into the exposed slot, as shown in
Figure E-1, and screw it on securely. Use CPU Cables and (if it’s a 1 x 4 card) a
User Cable to attach your equipment as desired; see Section 3.3.
Figure E-1. Installing a Port Card.