Specifications

115
APPENDIX B: Cable Product Codes
Appendix B: Cable Product Codes
The tables below and on the next page list the product codes for all the types of
cables we currently offer for use with the ServSwitch Affinity. The four digits that
follow the
dash in each product code indicate how long each cable is in feet
(one foot = 30.5 cm).
For most of these cables, xxx’s are shown in place of the last three digits of the
product code because the cables come in several stock lengths. For original
(standard) CPU and User Cables, these last three digits can be “001” (User Cables
only), “005,” “010,” or “020” for 1-foot (0.3-m), 5-foot (1.5-m), 10-foot (3-m) or
20-foot (6.1-m) cables respectively. For coaxial cables, these last three digits can be
“005,” “010,” “020,” “035,” “050,” “075,” or “100” for 5-foot (1.5-m), 10-foot (3-m),
20-foot (6.1-m), 35-foot (10.7-m), 50-foot (15.2-m), 75-foot (22.9-m), or 100-foot
(30.5-m) cables respectively.
You’ll also see the product codes for the Station Extender and CAT5 KVM Extender
equipment listed at the end of this appendix. Depending on your equipment and
the video resolution
you’re using, you might be able to use the Extenders to
connect the Affinity to a CPU or user station as much as 1000 ft. (305 m) away.
If your Affinity system has cabling requirements that can’t be met by what you
see here, call Black Box for a possible quote on custom cables or adapters.
Standard User Cables:
Monitor Type Keyboard Type Mouse Type Product Code
(Connector on Cable) (Connector on Cable) (Connector on Cable)
VGA (HD15 female) IBM PC/AT (5-pin DIN female) Serial RS-232 (DB9 male) EHN052-0xxx
VGA (HD15 female) IBM PS/2 (6-pin mini-DIN female) PS/2 (6-pin mini-DIN female) EHN054B-0xxx
Multisync (HD15 female) Sun (8-pin mini-DIN female) N/A EHN059-0xxx