Specifications

10
SERVSWITCH™ AFFINITY
Contents (continued)
Appendix Page
Appendix A: NVRAM Factory Defaults ....................................................... 113
Appendix B: Cable Product Codes .............................................................. 115
Appendix C: Pinout of the Dedicated Serial Ports ..................................... 118
Appendix D: The LK461 Keyboard ............................................................. 119
Appendix E: Installing Cards in the ServSwitch Affinity ............................ 120
E.1 Adding a Port Card ......................................................................... 120
E.2 Installing or Swapping In a Terminator Card
(4-User Chassis Only) .................................................................. 121
E.3 Setting the RING/BUS Jumper on an Expansion Card ............... 122
E.4 Setting the JP1 and JP2 (User-Number) Jumpers on
8-Port Expansion Cards ............................................................... 123
E.4.1 Setting JP1 and JP2 on a Card That Will Be Installed
in an 8-User Affinity ......................................................... 123
E.4.2 Setting JP1 and JP2 on a Pair of Cards That Will Be
Installed in a 16-User Affinity ......................................... 123
E.5 Installing or Swapping In an Expansion Card .............................. 125
Appendix F: Upgrading a Non-R2 Affinity with -R2 Serial Features ......... 126
Appendix G: Rackmounting the Affinity .................................................... 129