Installation guide

CHAPTER 1: Specifications

Maximum

Distance — Depending on the CPU, monitor, and video resolution

(see Section 4.1.3), either:

20 ft. (6.1 m) of original Serv cable from any

ServSwitch Ultra to any device attached to it, with

not more than 40 ft. (12.2 m) of total original Serv

cable between any CPU and any user station; or

20 ft. (6.1 m) of coaxial cable—possibly as much as

100 ft. (30.5 m), depending on CPUs—from any

ServSwitch Ultra to any device attached to it;

Also, 50 ft. (15.2 m) of serial cable from the RS-232 port

of any ServSwitch Ultra to a computer’s serial port

User Controls — All models:

Keyboard commands;

On-screen menus;

KV5002MA-R2:

(3) Front-mounted pushbuttons:

“ON/OFF” (power), “+” (switch to next port), and

“–” (switch to previous port);

All models except KV5002MA-R2:

(2) Front-mounted pushbuttons:

“” (switch to next port) and “” (switch to

previous port);

(1) Rear-mounted rocker switch for power

Indicators — All front-mounted LEDs;

All models: (1) for ServSwitch Ultra unit: POWER;

KV5002MA-R2: (4) for CPUs: (2) SELECT, (2) POWER;

KV5004SA-R2: (8) for CPUs: (4) SELECT, (4) POWER;

KV5008SA-R2, KV5008FA-R2:

(16) for CPUs: (8) SELECT, (8) POWER;

KV5012FA-R2: (24) for CPUs: (12) SELECT,

(12) POWER;

KV5016FA-R2: (32) for CPUs: (16) SELECT,

(16) POWER