Datasheet

724-746-5500 | blackbox.com
Page 8
Pattern Generator—Digital
3. Installation
3.1 Read These Notes First
NOTES:
1. Before using the pattern generator for the first time, charge it continously for
more than 16 hours.
2. If there is no image while using the pattern generator, make sure that:
a. The battery is charged. If the battery is dead or faulty, the pattern generator
will not switch on.
b. The resolution is set correctly. If the pattern generator switches on but there is
no image, lower the resolution or change the resolution and vertical frequency.
Make sure the HDMI or HDCP mode is compatible wth the monitor.
3. Charge the battery when the battery power indicator is low.
4. The pattern generator will save the most recent setting automatically.
3.2 Using the Pattern Generator
Follow these steps to use the pattern generator:
1. Insert the external AC adapter into an AC outlet and connect the power cord to
the power jack on the pattern generator.
2. Switch off the video display.
3. Connect the HDMI cable between the pattern generator and the video display.
4. Switch on the video display.
5. Press the pattern generator’s power key for more than three seconds to switch
the unit on/off.