Installation manual

2. WIRING
2-12
2.3 Example NavNet TZtouch System Configura-
tions
Basic plotter/fish finder installation
The Furuno GP-320B is connected to the CAN bus backbone cable, using the optional
NMEA data converter IF-NMEA2K2 (or IF-NMEA2K1). The DFF1/3 network sounder
is connected to the LAN port of the TZTBB using the standard supply cable
MOD-WPAS0001-030+(3 m) and a junction box TL-CAT-012.
DFF3
NETWORK SOUNDER
ST-BY
GPS RECEIVER
GP-320B
Cable from GP-320B
Cable from
IF-NMEA2K2
*
12 VDC
NMEA DATA CONVERTER
IF-NMEA2K2
*Cable fabrication is necessary to connect
GP-320B and IF-NMEA2K2.
TZTBB
(MPU-002)
CAN bus
drop cable
CAN bus backbone cable
MULTI FUNCTION DISPLAY
LAN cable
MOD-WPAS0001-030+, 3 m
LAN cable
(MOD-Z072)
12/24 VDC
Network Sounder
DFF3
12-24 VDC
Transducer
High
Freq.
Low
Freq.
TL-CAT-012 Junction Box