Specifications

724-746-5500 | blackbox.com
Page 4
Chapter 3: Mounting the Enclosure
The SmartPath AP is shown pole
mounted in the outdoor enclosure. A
shielded Ethernet cable provides it
with a network connection and power
through PoE. The pole is grounded,
and the SmartPath AP is electrically
connected to the grounded pole.
The shielded Ethernet cable passes
to the Ethernet protection device just
inside the building beyond the
Ethernet cable entry point. A second
Ethernet cable connects to the
network. The Ethernet protection
device is powered by a 30-watt power
supply connected to a power source.
These devices are also grounded.
Dual Band N-Type Outdoor
Antenna Set (4 antennas)
SmartPath AP
SmartPath AP in outdoor enclosure
mounted to a grounded pole with
antennas attached
Shielded Ethernet Cable
Mounting
Plate
SmartPath AP
Outdoor Enclosure
Pole
Bracket
Outdoor Enclosure Kit for SmartPath AP
(SmartPath AP not included)
Ethernet protection
device (above) and
30 watt power supply
(below) attached to a
grounded object
Ethernet Protection Device
30-Watt Power Supply
Figure 1. SmartPath AP (LWN602HA) mounted on a pole with major devices and accessories called out.
NOTE: For best performance, deploy SmartPath APs at least 100 feet (30.5 m) apart from each other.