Network Hardware User Manual

724-746-5500 | blackbox.com
Page 50
724-746-5500 | blackbox.com
Chapter 8: Status
8. Status
8.1 View Basic Information
Open “Information” in “Status” to check the basic information of the CPE, which is read-only.
Information includes system information, LAN settings, wireless setting, and interface status. Click “Refresh” at the bottom to get
the real-time information.
Figure 8-1. Basic information.
8.2 View Association List
Open “Connections” in “Status” to check the information for associated wireless devices, such as MAC address, signal strength,
connection time, IP address, etc. All are read-only. Click “Refresh” at the bottom to update the current association list.
Figure 8-2. Connection.