Router User Guide

Dual Trunk E1 Router
Dual Trunk E1 Router User’s Guide TECHNICAL: 0118 96 56 000 31
Logging Off from a Terminal
To log off, press Ctrl-x.
The terminal stops responding to your keystrokes when you are logged off.
Adjusting COMM Port Settings
COMM port settings can be modified in the Dual Trunk E1 Router using Menu 8F - COMM Port
Configuration.
The configurable settings are:
• Baud Rate
• Parity
• Word Length
•Stop bits
•Flow control
•DCD
For more information on Menu 8F and available options, see the 4200 WAN Access Platform TUI
Reference Guide.
LOGGING ON FROM A TELNET CONNECTION
To log on from a Telnet connection, use a terminal or terminal emulation program to access the unit
directly.
To log on to the unit user interface using a Telnet connection:
1. Enter the Telnet COMMand and the Dual Trunk E1 Router IP address.
Example of system response: MULTI is unit ID
Current ID is MULTI
MULTI password:
If you do not have an ID, you may still log in. A “Sorry” or Logged Out” Message will
appear. Press Ctrl-x to bring up a menu. Ctrl-x will not log you out until an ID is
assigned.
NOTE: When accessing the unit via Telnet, the system forces you off after
the fifth unsuccessful attempt to log on.
NOTE: It is possible to disrupt your terminal connection by changing these
settings.