Specifications

Event Logs

* Link X, DLCI Y attached to remote site <remote site alias>

Generated for frame relay applications when a connection has been made for the DLCI associated with the remote

site alias.

* Link X down

Generated when a WAN link goes down.

* Link X down to <remote site alias>

Generated when a WAN link connection to the specified remote site goes down.

* Link X – LMI Error Threshold exceeded

Generated when the defined error threshold has been exceeded on the specified link.

* Link not available for remote site <remote site alias>

The link associated with this remote site is already in use.

*Link not configured for frame relay on remote site <remote site alias>

The link that has been assigned to this remote site is not configured for frame relay.

*Link not configured for leased line on remote site <remote site alias>

The link that has been assigned to this remote site is not configured for leased line operation.

* Link X Outgoing Data Call to [DN]

Generated when a data call is outgoing to the dialing network.

* Link X up

Generated when a WAN link comes up.

* Link X up at Y baud

Generated when frame relay link is established.

* Link X up to <remote site alias>

Generated when a WAN link connection to the specified remote site comes up.

* Local DNS server added to firewall

The IP address of the Local DNS server added to the table of services available through the firewall.

* Local DNS server removed from firewall

The IP address of the Local DNS server removed from the table of services available through the firewall.

* NAT UDP flooding – Possible security risk. Src is <IP address>

Generated when more than the allowed maximum number of UDP entries has been attempted. This feature is in

place to prevent denial of service attacks. The source IP address of the UDP datagrams is displayed.