Specifications

Event Logs

DHCP: pool deleted due to mismatch with new IP address

Generated when the address of this device is changed , rendering the block of addresses assigned to the DHCP pool

invalid.

DHCP: Requested address unavailable <IP address>

Generated when the address requested by a client is unavailable

DHCP services – declined. Address <IP address> declined by client, mark it as unavailable.

Generated when a client declines an address offered by the DHCP service, usually because the client has found from

some other source that the address is unavailable.

DHCP services – release. <IP address> released.

Generated when IP address displayed is released from its assignment to a device and put back in the IP pool for re-

assignment.

Entering loopback. Initiated by remote device

T1/E1 signal loopback test started by the unit on the far end of this link.

Exiting loopback. Initiated by remote device

T1/E1 signal loopback test ended by the unit on the far end of this link.

Error executing: XXXXXX

Generated when an error is detected loading back a configuration. The invalid command is specified.

Incorrect password from <IP address>

Generated when an incorrect password is given for a Telnet connection. The connecting bridge/router’s

name or IP address is specified. After three incorrect login attempts within ten minutes, an alarm is generated

(see Security alarms: “Possible intruder”) and any further attempts from that IP address within the next ten

minutes are rejected.

Invalid Relay Destination for subnetted network

Generated when a device attempts to do a network broadcast on a subnetted network.

IPX: Network configuration error from X, network Y.

Generated when the router and server do not agree on a network number.

IPX: routing table full

Generated when the IPX RIP table has been filled. Any new RIP frames received will be discarded.

IPX: Service table full

Generated when the IPX SAP table has been filled. Any new SAP frames received will be discarded.

IPX: X, unknown RIP packet type received

Generated when the device receives an invalid RIP packet.