Datasheet

877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com
Page 5 Page 6
© Copyright 2016. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
Quick Start Guide
LPH1000 Series Industrial Ethernet PoE Switch
LPH1006A
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 877-877-2269
Web site: www.blackbox.com
E-mail: [e-mail]
Customer
Support
Information
LPH1006A Quick Start Guide
lph10 06a_qsg _rev2
Table 2-1. Switch components.
Number in
Figure 2-1
Component Description
1 (2) Power
LEDs
Light when unit is
powered on.
2 (2) SFP Speed
DIP Switches
Selects 100M/1G.
3 (2) SFP Link/
Act LEDs
Light when SFP Link is
active.
4 (2) SFP slots SFP module (LFP401–
LFP404, LFP411–
LFP414, LFP416) installs
here
5 (4) Gigabit
RJ-45 PoE
ports
Link to 10/100/1000-
Mbps PoE Ethernet
devices or segments
6 (1) Power
Fault LED
Lights when power is
on.
7 (4) RJ-45
port LINK/
ACT LEDs
ON when port is con-
nected;
OFF when port is not
connected;
Flashing when data is
transmitted or received
8 (4) RJ-45
port PoE
LEDs
ON when port is using
PoE;
OFF when port is not
using PoE
NOTE: SFP modules are ordered separately.
Table 2-2. Relay output DIP switches (#9 in Figure 2-1).
Code Description
LFP401 SFP, 155-Mbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 2 km
LFP402 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Multimode, 2 km, LC
LFP403 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 30 km, LC
LFP404 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 60 km, LC
LFP411 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 300 m
LFP412 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Multimode, LC, 2 km
LFP413 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 10 km
LFP414 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 30 km
LFP416 SFP with SGMII Interface, 1.25 Gbps, Copper,
10/100/1000BASE-T, Extended Diagnostics
Table 2-3. Compatible SFPs.
DIP-1 DIP-2 Description
OFF OFF Power failure relay alarm disabled.
ON OFF PWR-1 failure, relay alarm enabled
OFF ON PWR-2 failure, relay alarm enabled.
ON ON PWR-1 or PWR-2 failure, relay alarm
enabled.