Free 24-hour tech support: 724-746-5500 blackbox.com © 2010. All rights reserved. Black Box Corporation. Dynamic Fiber Conversion System Our toughest, most versatile media conversion system.
OVERVIEW Features » Dynamic modular system grows with your network. » More module choices than any other media converter system. » Tough construction for hard use: Most modules are NEBS Level 3 certified. » Use with or without management. » Hot-swappable modules. » Four different powered chassis to choose from. The Dynamic Fiber Conversion System is without a doubt the most robust media conversion system we’ve ever evaluated. The system is suited for fiber-based carrier-class or enterprise networks.
UTP to Multimode Duplex Fiber Modules These modules convert Ethernet from twisted-pair to standard duplex multimode fiber optic cable. They’re available in 10-Mbps, 100-Mbps, and 1000-Mbps, as well as autosensing 10-/100-Mbps and 10-/100-/1000-Mbps modules. UTP ports are autosensing for half- or full-duplex. An MDI/MDI-X switch eliminates the need for crossover cable.
What’s included Technically Speaking Single-strand fiber WDM. Traditional fiber optic media converters perform a useful function but don’t really reduce the amount of cable needed to send data on a fiber segment. They still require two strands of glass to send transmit and receive signals for fiber media communications. Wouldn’t it be better to combine these two logical communication paths within one strand? That’s exactly what single-strand fiber conversion does.
Technically Speaking What is NEBS Level 3? Network Equipment Building System (NEBS) standards set requirements for telco equipment. The standards are maintained by Telcordia Technologies, Inc., formerly Bellcore. Bellcore Special Report, SR-3580 defines three distinct functional levels of NEBS compliance. The third of these levels, NEBS Level 3, is the most stringent, certifying carrier-class equipment intended for long-term use in variable environments.
LMC3004A: shown with modules 05/18/2010 #10841 724-746-5500 Item Code Dynamic Fiber Conversion System First, order the chassis… 19-Slot Power Chassis (Managed, Rackmount) with (1) AC Power Supply LMC3004A with (2) AC Power Supplies LMC3005A with (1) DC Power Supply LMC3007A with (2) DC Power Supplies LMC3008A 5-Slot Power Chassis (Managed, Rackmount) with (1) AC Power Supply LMC3010A with (2) AC Power Supplies LMC3080A with (1) DC Power Supply LMC3012A with (2) DC Power Supplie
LMC3032C 05/18/2010 #10841 724-746-5500 Item Code UTP to Single-Mode Single Fiber 100BASE-TX to 100BASE-FX 1310-nm TX/1550-nm RX 20 km, SC LMC3029C 40 km, SC LMC3030C 1550-nm TX/1310-nm RX LMC3031C 20 km, SC 40 km, SC LMC3032C 10BASE-T/100BASE-TX to 100BASE-FX 1310-nm TX/1550-nm RX 20 km, SC LMC3039C 40 km, SC LMC3040C 1550-nm TX/1310-nm RX 20 km, SC LMC3041C 40 km, SC LMC3042C 1000BASE-TX to 1000BASE-X 1310-nm TX/1550-nm RX 20 km, SC LM
LMC3108A 05/18/2010 #10841 724-746-5500 Item Code Desktop Managed Media Converters for the Dynamic Fiber Conversion System, 110 VAC 10BASE-T/100BASE-TX to 100BASE-FX Multimode, 5 km 5 km, ST LMC3100A 5 km, SC LMC3102A Single-Mode, 1310-nm, 30 km 30 km, ST LMC3101A 30-km, SC LMC3103A Single-Mode, Single-Strand, 20 km (Order one of each.
