Datasheet

724-746-5500 blackbox.com
BL A C K B O X
®
4 of 6
05/14/2010
#24868
miles(50km).TheconverterscomplywithIEEE802.3and1000BASE-
LX/SXstandards.
Mode Converters for ATM OC-3 and OC-12
ModeConvertersforATMsupportOC-3orOC-12standards
overATMnetworksandtheSynchronousOpticalNETwork(SONET).
They’reperfectforextendinglinedropsinlargecorporations,
regional and national telco switching offices, and other intercampus
telecommunication systems.
TheFlexPointOC-3Single-ModetoMultimodeFiberConverter
provides155-Mbpsconnectionstoextendnetworkdistancesby
connecting multimode fiber networks or devices over single-mode
fiber cabling.
TheFlexPointOC-12Single-ModetoMultimodeFiberConverter
provides622-Mbpsconnectionstoextendnetworkdistancesby
connecting multimode fiber networks or devices over single-mode
fiber cabling.
LEDsreporttheavailabilityofpowerandthedetectionofdevices
attached to the fiber ports.
10/100 Rate Converters
ThisgroupofrateconvertersconnectsFastEthernet100BASE-FX
fiberto10BASE-Tor100BASE-TXUTPLANs.Theyuseautonegotiation
for full- and half-duplex operation and can handle numerous fiber
types. An override switch provides total manual control over the
10/100operationoftheUTPportandthehalf-/full-duplexoperation
ofboththefiberandUTPport.
Thefiberportoperatesat1300or1550nm(dependingonthe
model)andfeaturesSC,ST,orMT-RJconnectors.Multimodemodels
supportdistancesof1.2miles(1.9km),andsingle-modemodels
supportupto16.8miles(27km).Long-haul(LH)modelssupport
distancesofupto34.8,51,or60miles(56,82,or96.6km).
Theseconvertersalsofeaturea1MBstore-and-forwardbuffer
and MAC address learning.
T1/E1 Copper to Fiber Line Drivers
FlexPointT1/E1CoppertoFiberLineDriversconvertcoaxand
twistedpairtomultimodeorsingle-modefiber—andtheyextendT1/
E1overfiber.
T1/E1CoppertoFiberLineDriversfeatureacrossoverswitchon
theRJ-45/RJ-48portforeasyconnectionstoequipment.Dryrelay
contactsonPins3and6oftheRJ-45connectorprovideconnection
to alarm equipment. The contact closes when the signal is lost on
the copper or fiber connection.
LEDsdisplaytheT1/E1linkstatus,diagnosticmodesofoperation,
and line segment errors.
ThelinedriverssupportAMI,B8ZS,andHDB3linecodes.
ToinstallanyoftheconvertersonaDINrail,selecttheDINRail
MountingKit(LMC207-DRM).
TECH SPECS
Power Chassis:
Indicators —LED:(1)Power
Power —LMC200:115–230-VAC,50–60-Hz,autosensingsinglepower
 supply;
LMC200-2PS:115–230-VAC,50–60-Hz,autosensingdualpowersupply;
LMC200A-DC:48-VDC,singlepowersupply;
LMC200A-2PS-DC:48-VDCdualpowersupply
Size —3"Hx19"Wx10"D(7.6x48.3x25.4cm)
Weight —7lb.(3.2kg)
5-Position Rackmounting Kit:
Size —1.75"(1U)Hx19"Wx5"D(4.4x48.3x12.7cm)
Weight —2lb.(0.9kg)
Modules:
CE Approval — Yes
Power —110-VAC,60-Hz,externalpowersupply(230-VAC,
50-Hzversiononrequest)orfromPowerChassis
Size —1"Hx3"Wx4"D(2.5x7.6x10.2cm)
Weight —0.4lb.(0.2kg)
What’s included
Media Converter Chassis (LMC200, LMC200A-DC,
LMC200-2PS, LMC200A-2PS-DC):
✦ Chassis
✦ Power cord
✦User’smanual
Media Converter Modules:
✦ Converter
✦ Power supply
✦User’smanual