Datasheet

Industrial Managed and Unmanaged Gigabit Ethernet Switches
877-877-2269 | blackbox.com
Product Data Sheet
LIG1014A LIE1014A LIG401A LIE401A
Overview
The Industrial Managed and Unmanaged Gigabit Ethernet
Switches include unmanaged switches that provide four
(4) copper RJ-45 ports and one (1) multi-rate SFP slot and
managed switches provide eight (8) and ten (10) copper RJ-45
ports and four (4) multi-rate SFP slots.
Power over Ethernet
The LIE401A and LIE1014A switches support Power over Eth-
ernetcompliant to the IEEE 802.3af and IEEE 802.3at standard
on all copper ports. Thus these switches can be used to power
standard PoE PD devices with up to 30 watts per port along
with the Ethernet data on standard Ethernet Cabling.
Multi-rate SFP slots
The benefit of having multi-rate SFP slots is to be able to use
100-Mbps and 1-Gbps SFP Modules for either multi- or
single-mode in a mix and match as needed. If requirements
change, just replace the SFP module and protect your switch
investment.
Power
The switches are powered from 12- to 58-VDC. The PoE
models need 48 VDC for 802.3af and a minimum of 53 VDC
for 802.3at.
Extended temperature range
All models are tested and released for operating temperatures
from -40° up to +75° Celsius. They passed shock, vibration and
freefall test and comply with the IEC600068-2-6, -27 and -32
standards.
Management
The switches offer powerful features including Layer 3 routing
and management with all advanced filter and multicast
algorithms needed today to easily prioritize, partition, and
organize a reliable high-speed network.
Basic Features
• Unmanaged models offer (4) 10/100/1000 plus (4) multi-rate
SFPs.
• Managed models provide (8) or (10) 10/100/1000
plus (1) multi-rate SFP.
• Models with Power over Ethernet Plus deliver 30 watts power
per port to remote PD devices.
• Extended temperature range: -40° to +75°C.
• L2 wire speed switching.
• 12 to 58V DC dual input, reverse polarity.
• IP30 industrial design.
• DIN-rail mountable.
• Shock, vibration and freefall test to IEC60068-2-6, -27, -32.
• EMC approval acc. to IEC61000-4-2, -3, -4, -5, -6 (Level 3).
LIG1014A
LIE1014A
LIG401A
LIE401A