USER MANUAL LGC215A-R2 10/100/1000BT TO 1000BX POE+ GB MEDIA CONVERTER 10 PO /10 M E+ 0/1 ed G10i 000 ia gGa B C bBia as o tsE e- n et-h T v Tet to er ron 1 e1t0 00 ter CGo 0B Bnav as seer e-X t-eR rS FP 24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT TABLE OF CONTENTS 1.877.877.2269 1. SPECIFICATIONS ................................................................................................................................................................................................. 3 2. OVERVIEW .............................................................................................................................................................................................
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 1: SPECIFICATIONS 1.877.877.2269 TABLE 1-1. SPECIFICATIONS SPECIFICATION DESCRIPTION Approvals FCC Class B, CE, RoHS Description Pure Networking Copper to Fiber Media Converter - 10/100/1000BASE-TX to 1000BASE-X SFP PoE+ Connectors (1) RJ-45, (1) SFP cage Media Supported UTP: CAT5/5e/6; Fiber: Multimode (MM): 50/125 µm or 62.5/125 µm; Fiber Single-mode (SM): 9/125 µm Distance CATx: 328 ft.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 2: OVERVIEW 1.877.877.2269 2.1 INTRODUCTION The 10/100/1000BASE‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP supports Gigabit copper and fiber media for network connection. This converter can be used as a standalone unit. 2.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 2: OVERVIEW 1.877.877.2269 TABLE 2-1. MEDIA CONVERTER COMPONENTS NUMBER IN FIGURE 2-1 OR 2-2 COMPONENT DESCRIPTION 1 SFP cage SFP module installs here 2 LED indicators See Table 2-2 3 RJ-45 connector Links to RJ-45 cable 4 Barrel connector for power Links to 47–57-VDC power supply 5 4-position DIP switch Set for LFP or 10M operation TABLE 2-2.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 3: LINK FAULT PASSTHROUGH (LFP) 1.877.877.2269 The Link Fault Pass-Through (LFPT) is a troubleshooting feature that combines TX and FX LinkLoss from both the local and remote media converters, TX-FX/SFP modules. LFPT is enabled by turning on the DIP switch on both modules. This feature allows either end of the conversion to detect a link fault occurring at the other end of the media conversion chain.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 4: INSTALLING THE CONVERTER 1.877.877.2269 Follow these steps to install the PoE+ Media converter: 1. Turn off the power of the device/station in a network to which the Switch will be attached. 2. Ensure that there is no activity in the network. 3. Install the SFP module. TABLE 4-1.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT CHAPTER 5: POE FUNCTION 1.877.877.2269 Before your installation, we recommended that you check your network environment. If there is an IEEE 802.3at/802.3af device you need to power on, the switch can provide a way to supply power for this Ethernet device conveniently and easily. The Switch equips an AC-DC adapter with 52-VDC input and it injects the DC power into the pin of the twisted pair cable (Pin 1, 2, 3 and 6).
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT APPENDIX A: TWISTED-PAIR AND FIBER CABLES 1.877.877.2269 A.1 RJ-45 CABLE PIN ASSIGNMENT There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following diagrams show the pin allocation and color of straight cable and crossover cable connections. 1 2 3 6 8 4567 123 FIGURE A-1.
NEED HELP? LEAVE THE TECH TO US APPENDIX A: TWISTED-PAIR AND FIBER CABLES LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 A.2 FIBER OPTIC CABLE TABLE A-1. FIBER OPTIC PATCH CABLE STANDARD FIBER TYPE CABLE SPECIFICATION 1000BASE-SX (850 nm) Multimode 50/125 µm or 62.5/125 µm Multimode 50/125 µm or 62.5/125 µm Single-mode 9/125 µm 1000BASE-LX (1300 nm) 10 1.877.877.2269 BLACKBOX.
NEED HELP? LEAVE THE TECH TO US APPENDIX B: REGULATORY INFORMATION LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 B.1 FCC STATEMENT Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
NEED HELP? LEAVE THE TECH TO US APPENDIX B: REGULATORY INFORMATION LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 B.2 NOM STATEMENT 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4.
NEED HELP? LEAVE THE TECH TO US APPENDIX C: DISCLAIMER/TRADEMARKS LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 C.1 DISCLAIMER Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice. C.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT NOTES 1.877.877.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT NOTES 1.877.877.
NEED HELP? LEAVE THE TECH TO US LIVE 24/7 TECHNICAL SUPPORT 1.877.877.2269 © COPYRIGHT 2022. BLACK BOX CORPORATION. ALL RIGHTS RESERVED. LGC215A-R2_USER_REV1.
