User manual

Remote Console Manager (LES1204A-3G) Quick Start Guide
7
Figure 5. Serial & Network: Users & Groups screen.
 To grant limited access to the management console, check the “User”
group. To grant full access to the management console, check the
“Admin” group. By default, the user is granted no management console
access.
 Click “Apply.”
Note: The Remote Console Manager comes with a default certificate for
initial configuration purposes only. You will need to direct your browser to
(temporarily) proceed and accept this untrus ted certificate. It is
recommended as soon as possible thereafter you generate and install a new
trusted certificate. To produce the unique CSR and later upload the newly
issued certificate, select System: SSL Certificates.
Step 6: Connect to Carrier.
 To configure the Remote Console Manager cellular modem to connect to
your carrier, select the “Internal Cellular Modem” tab on the “System:
Dial” menu and check “Enable” for “Dial-Out Settings—OOB.”
NOTE: With OOB (Out-Of-Band) enabled, the cellular modem connection
once established will remain always ON.
NOTE: Your GSM carrier may have provided you with details for
configuring the connection including APN (Access Point Name), Pin
Code (optional PIN code which may be required to unlock the SIM
card), Phone Number (the sequence to dial to establish the connection,
defaults to *99***1#), Username/Password (optional) and Dial string
(optional AT commands). However, you generally will only need to
enter your carrier’s APN and leave the other fields blank.