User manual

Remote Console Manager (LES1204A-3G) Quick Start Guide
3
Follow the steps listed below to get started:
Step 1: Check kit contents.
 LES1204A-3G Remote Console Manager
 This printed quick start guide
 (1) CD-ROM containing a user’s manual in PDF format
 (2) UTP cables
 (1) DB9F-RJ-45 adapter straight-pinned
 (1) DB9F-RJ-45 adapter crossover-pinned
 (1) RF antenna with bracket mount and 1-ft. (30-cm) cable
 Universal input 12-VDC power pack
Step 2: Connect the hardware.
NOTE: The LES1204A-3G Remote Console Manager has an internal 3G
GSM cellular modem. Your carrier will provide you with a SIM card to
activate your GSM cellular modem plan. The SIM card must be installed in
the Remote Console Manager before applying power.
 Unscrew the SIM card access panel on the side of the Remote Console
Manager and insert the SIM card with contacts facing upward. The SIM
card will lock into place. You may use the tip of the RF antenna to fully
seat the SIM card. Replace the SIM card access panel.
 Attach the RF antenna using the cable to the Remote Console Manager.
 Connect your serial devices to the four SERIAL ports. The RJ-45 serial
connectors have Cisco® serial pinouts:




  
  
  
  
  
!  
"  
#  
$  

Figure 1. Cisco serial pinouts.
 Connect the LAN port to your network.
 Plug the power pack into the AC power receptacle and connect the DC
power cable to the Remote Console Manager’s 9-12 VDC power socket.