Specifications

LDM-MR19.2

5. Operation

This chapter describes the LDM-19.2’s controls and indicators, operating

procedures, and strapping information. Be sure you finish installing the

LDM-MR19.2 (refer to Chapter 3 for the standalone or Chapter 4 for the card

version) before you attempt to operate it.

5.1 Controls and Indicators

All of the LDM-MR19.2’s external controls and LED indicators are located on the

unit’s front panel, as shown in Figure 5-1 below (standalone) or Figure 5-2 on the

next page (card). The numbers and letters under the “Item” heading in Tables 5-1

and 5-2 on page 40 correspond to the numbers and letters in Figures 5-1 and 5-2.

Figure 5-1. The standalone LDM-MR19.2’s front panel.

DIG ANA

TESTDCDRDTDRTSPWR

REM

CBA

1 2 3 4 5 6