User guide

BLACK BOX
®
Series Convenient Switches Installation and User Guide
31
In a typical installation, the LE1505-RACK, 19” rack-mount tray will hold a few (three to
eight) LBH101A Series Convenient Switches, with their power supplies plugged into
power strips (not included) in the rear area of the tray. Metal mounting screws in the
bottom-front hold the Convenient Switches firmly in place. The beveled-top edge of the
units permits the LEDs of each unit to be viewed for operational status, even when the units
are very close together.
3.3 LH1505P-RACK for Rack Mounting Convenient Switches
The LH1505P -RACK is another option available for Rack Mounting the mix-match of
LBH101A Series Convenient Switches together in 19” rack-mount tray. The LH1505P-
RACK model comes with built-in common universal AC power supply rated at 40 watts at
50C ambient, 12VDC output, and supporting up to 10 MC units. (Six tray positions for
MC’s are not wired for power). Typically, 3 to 8 MC units are in use with a LH1505P-
RACK, with expansion space left available.