User guide
BLACK BOX
®
Series Convenient Switches Installation and User Guide
7
Power Consumption: See Section 3.6.
Note 1: the 8-15V DC jack can be used for dual source DC input using an AC adapter and
the DC terminal block. Power supply protection is provided by internal diodes.
Note 2: The Direct DC power floats. The user may ground either “+” or “-” if desired.
Port Connectors
:
Two RJ-45 Ports: support 100BASE-TX and 10BASE-T with auto-cross (MDIX).
They are shielded 8-pin female connectors for shielded (STP) and unshielded
(UTP) Cat 3, 4, 5 cable.
For Power over Ethernet (PoE) pass-through option on the RJ-45 connectors of the
H or P models, request quote.
LED Indicators
(Dual: front and top)
POWER: Steady ON when power applied
10/100: Steady ON for 100Mbps; OFF for 10 Mbps