USER GUIDE ADVANCED 4-PORT DP, HDMI & DVI-I SECURE KVM SWITCH USM-2S0-MM5 REV: 2.
USER GUIDE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 3 WHAT’S IN THE BOX? 4 SECURITY FEATURES 4 FRONT AND REAR 4 INSTALLATION 5 CAC INSTALLATION: COMMON ACCESS CARD, SMART CARD READER 8 CAC PORT CONFIGURATION 8 AUDITING: Dumping the Event Log via User Menu Options 9 RESET: Restore Factory Default 9 LED’s BEHAVIOR 10 SYSTEM OPERATION 11 TROUBLESHOOTING 11 TECHNICAL SUPPORT 11 LIMITED WARRANTY STATEMENT 12 2
USER GUIDE TECHNICAL SPECIFICATIONS VIDEO Format DisplayPort, HDMI, DVI-I Dual Link Host Interface (8) DisplayPort 20-pin (female); (4) HDMI 19-pin (female); (4) DVI-I (female); User Console Interface (2) DisplayPort 20-pin (female); (1) HDMI 19-pin (female); (1) DVI-I (female); Max Resolution 3840x2160 @ 30Hz DDC 5 volts p-p (TTL) Input Equalization Automatic Input Cable Length Up to 20 ft. Output Cable Length Up to 20 ft. USB Signal Type USB 1.1 and 1.0 Keyboard and Mouse only. USB 2.
USER GUIDE WHAT’S IN THE BOX? KVS4-4004DHVX BX-1203000 4-Port Quad-Head Secure Pro Single-Head DVI, Single-Head HDMI, and Dual-Head DP KVM with Audio and CAC Desktop power supply 100-240V, 12VDC 3A User Manual SECURITY FEATURES ANTI-TAMPER SWITCHES Each model is equipped with internal Anti-Tamper switches, which sense attempts to open the device enclosure.
USER GUIDE INSTALLATION SYSTEM REQUIREMENTS 1. 2. Black Box Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running operating systems such as Windows or Linux.
USER GUIDE INSTALLATION 1. 2. 3. 4. 5. 6. 7. 8. 9. Ensure that power is turned off or disconnected from the unit and the computers. Use DisplayPort, HDMI and DVI cables to connect the DisplayPort, HDMI and DVI output port from each computer to the corresponding DP IN, HDMI IN and DVI IN ports of the unit. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. Optionally connect a stereo audio cable (3.5mm to 3.
USER GUIDE INSTALLATION (Continued) EDID Learn: Factory default video EDID is set to HP (1080P max resolution) to allow initial operation with most of the DP display brands. For security reasons, EDID learn of most DP displays’ brands can be achieved only by Authenticated Administrator. Use the following steps to properly set up your EDID learning: 1. 2. 3. 4. 5. 6. 7. 8. Ensure power is disconnected or turned off from both the unit and the computer.
USER GUIDE CAC (COMMON ACCESS CARD, SMART CARD READER) INSTALLATION INSTALLATION The following steps are intended for the system administrator or IT manager only. If you have the optional CAC ports there will be 2 ports on a 2 host ports Secure KVM Switch and 4 ports on a 4 host ports Secure KVM Switch. CAC connection to the computer requires a USB cable connection separate from the keyboard and mouse. This allows the CAC to be connected independently from the keyboard and mouse.
USER GUIDE AUDITING: Dumping the Event Log via User Menu Options The following steps are intended for the system administrator. Note: Only one computer connected to port 1 is required for this operation The Event Log is a detailed report of critical activities stored in the Secure KVM Switch or Secure KVM Switch memory. A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the Administrator’s Guide available for download from: https://www.blackbox.
USER GUIDE LED’s BEHAVIOR User Console Interface – Display LED: # Status Description 1 Off Monitor is not connected 2 On Monitor is connected 3 Flashing EDID problem – Learn EDID to fix the problem User Console Interface – CAC LED: # Status Description 1 Off CAC is not connected 2 On Authorized and functional CAC is connected 3 Flashing Non-CAC peripheral is connected Front Panel – Port Selection LED’s: # Status Description 1 Off Non-selected port 2 On Selected port 3 Flash
USER GUIDE SYSTEM OPERATION Front Panel Control To switch to an input port, simply push the desired input button on the front-panel of the Secure KVM Switch. If an input port is selected, the LED of that port will turn on. An open session is terminated upon switching to a different computer. TROUBLESHOOTING No Power • Make sure that the power adapter is securely connected to the power connector of the unit. • Check the output voltage of the power supply and make sure that the voltage value is around 12VDC.
USER GUIDE LIMITED WARRANTY STATEMENT A. Extent of limited warranty Black Box warrants to the end-user customers that the product specified above will be free from defects in materials and workmanship for the duration of 18 months, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. Black Box limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any: a.
USER GUIDE NOTICE The information contained in this document is subject to change without notice. Black Box makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. Black Box will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
