USER GUIDE ADVANCED 2/4/8-PORT DVI-I SECURE KVM SWITCH USM-2S0-MM6 REV: 3.
USER GUIDE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 3 WHAT’S IN THE BOX? 4 SECURITY FEATURES 4 FRONT AND REAR 4 INSTALLATION 5 CAC INSTALLATION: COMMON ACCESS CARD, SMART CARD READER 10 CAC PORT CONFIGURATION 10 AUDITING: Dumping the Event Log via User Menu Options 11 RESET: Restore Factory Default 11 LED’s BEHAVIOR 12 SYSTEM OPERATION 13 TROUBLESHOOTING 13 TECHNICAL SUPPORT 13 LIMITED WARRANTY STATEMENT 14 2
USER GUIDE TECHNICAL SPECIFICATIONS VIDEO Format DVI-I Dual Link KVS4-1002D Host Interface User Console Interface (2) DVI-I 29-pin (female) KVS4-2002D / KVS4-1004D (4) DVI-I 29-pin (female) KVS4-2004D / KVS4-2004DX / KVS4-1008DX (8) DVI-I 29-pin (female) KVS4-2008D / KVS4-2008DX (16) DVI-I 29-pin (female) KVS4-1002D / KVS4-1004D / KVS4-1008DX (1) DVI-I 29-pin (female) KVS4-2002D / KVS4-2004D / KVS4-2004DX / KVS4-2008D / KVS4-2008DX (2) DVI-I 29-pin (female) Max Resolution 2560 x 1600 @ 60Hz;
USER GUIDE WHAT’S IN THE BOX? Secure DVI-I KVM Switch Unit 2/4/8-port Secure DVI-I KVM Switch Power Supply Desktop power supply 100-240V, 12VDC 3A SECURITY FEATURES ANTI-TAMPER SWITCHES Each model is equipped with internal Anti-Tamper switches, which sense attempts to open the device enclosure.
USER GUIDE INSTALLATION SYSTEM REQUIREMENTS 1. 2. Black Box Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running operating systems such as Windows® or Linux.
USER GUIDE INSTALLATION Single-Head Units: 1. 2. 3. 4. 5. 6. 7. 8. 9. Ensure that power is turned off or disconnected from the unit and the computers. Use a DVI cable to connect the DVI output port from each computer to the corresponding DVI-I IN ports of the unit. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. Optionally connect a stereo audio cable (3.5mm to 3.
USER GUIDE INSTALLATION (Continued) Multi-Head Units: 1. Ensure that power is turned off or disconnected from the unit and the computers. 2. Use DVI cables to connect the DVI output ports of each computer to the corresponding DVI-I IN ports of the unit. For example, if using KVS4-2004DX the four DVI ports of one computer must all be connected to one channel.
USER GUIDE INSTALLATION (Continued) DVI OUT DVI IN2 DVI IN1 CONSOLE K/M 12VDC IN-2 AUDIO IN-1 K/M AUDIO K/M AUDIO KVS4-1002D DVI-I IN USB IN AUDIO OUT USB OUT DVI-I OUT AUDIO IN Figure 1-6: KVS4-1002D DVI OUT DVI IN8 DVI IN7 DVI IN6 DVI IN5 DVI IN4 DVI IN3 DVI IN2 DVI IN1 CONSOLE K/M 12VDC AUDIO IN-8 AUDIO IN-7 K/M CAC AUDIO IN-6 K/M CAC AUDIO IN-5 K/M CAC AUDIO IN-4 K/M CAC AUDIO IN-3 K/M CAC AUDIO IN-2 K/M CAC AUDIO IN-1 K/M CAC AUDIO K/M CAC CAC KVS4-
USER GUIDE INSTALLATION (Continued) EDID Learn: The Secure KVM Switch is designed to learn the connected monitor’s EDID upon power up. In the event of connecting a new monitor to the Secure KVM Switch, a power recycle is required. The Secure KVM Switch will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port one green and push button blue LEDs will both begin to flash for about 10 seconds. When the LEDs stop flashing, the EDID learn process is done.
USER GUIDE CAC (COMMON ACCESS CARD, SMART CARD READER) INSTALLATION INSTALLATION The following steps are intended for the system administrator or IT manager only. If you have the optional CAC ports there will be 2 ports on a 2-host-port Secure KVM Switch and 4 ports on a 4-host-port Secure KVM Switch. CAC connection to the computer requires a USB cable connection separate from the keyboard and mouse. This allows the CAC to be connected independently from the keyboard and mouse.
USER GUIDE AUDITING: Dumping the Event Log via User Menu Options The following steps are intended for the system administrator. Note: Only one computer connected to port 1 is required for this operation. The Event Log is a detailed report of critical activities stored in the Secure KVM Switch or Secure KVM Switch memory. A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the Administrator’s Guide available for download from: https://www.blackbox.
USER GUIDE LED’s BEHAVIOR User Console Interface – Display LED: # Status Description 1 Off Monitor is not connected 2 On Monitor is connected 3 Flashing EDID problem – Learn EDID to fix the problem User Console Interface – CAC LED: # Status Description 1 Off CAC is not connected 2 On Authorized and functional CAC is connected 3 Flashing Non-CAC peripheral is connected Front Panel – Port Selection LEDs: # Status Description 1 Off Non-selected port 2 On Selected port 3 Flashi
USER GUIDE SYSTEM OPERATION Front Panel Control To switch to an input port, simply push the desired input button on the front-panel of the Secure KVM Switch. If an input port is selected, the LED of that port will turn on. An open session is terminated upon switching to a different computer. TROUBLESHOOTING No Power • Make sure that the power adapter is securely connected to the power connector of the unit. • Check the output voltage of the power supply and make sure that the voltage value is around 12VDC.
USER GUIDE LIMITED WARRANTY STATEMENT A. Extent of limited warranty Black Box warrants to the end-user customers that the product specified above will be free from defects in materials and workmanship for the duration of 36 months, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. Black Box limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any: a.
USER GUIDE DISCLAIMER Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice. TRADEMARKS Black Box and the Black Box logo type and mark are registered trademarks of BB Technologies, Inc.
