USER GUIDE ADVANCED 2/4/8-PORT DISPLAYPORT SECURE KVM SWITCH USM-2S0-MM7 REV: 3.
USER GUIDE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 3 WHAT’S IN THE BOX? 4 SECURITY FEATURES 4 FRONT AND REAR 4 INSTALLATION 5 CAC INSTALLATION: COMMON ACCESS CARD, SMART CARD READER 10 CAC PORT CONFIGURATION 10 AUDITING: Dumping the Event Log via User Menu Options 11 RESET: Restore Factory Default 11 LED’s BEHAVIOR 12 SYSTEM OPERATION 13 TROUBLESHOOTING 13 TECHNICAL SUPPORT 13 LIMITED WARRANTY STATEMENT 14 2
USER GUIDE TECHNICAL SPECIFICATIONS VIDEO Format Host Interface User Console Interface DisplayPort™ KVS4-1002V (2) DisplayPort 20-pin (female) KVS4-2002V / KVS4-2002VX / KVS4-1004V (4) DisplayPort 20-pin (female) KVS4-2004V / KVS4-2004VX / KVS4-1008V / KVS4-1008VX (8) DisplayPort 20-pin (female) KVS4-4004VX / KVS4-2008VX (16) DisplayPort 20-pin (female) KVS4-1002V / KVS4-1004V / KVS4-1008V / KVS4-1008VX (1) DisplayPort 20-pin (female) KVS4-2002V / KVS4-2002VX / KVS4-2004V / KVS4-2004VX / KVS4-2
USER GUIDE WHAT’S IN THE BOX? Secure DP KVM Switch Unit 2/4/8-Port Dual-Head Secure DP KVM Power Supply Desktop power supply 100-240V, 12VDC 3A SECURITY FEATURES ANTI-TAMPER SWITCHES Each model is equipped with internal Anti-Tamper switches, which sense attempts to open the device enclosure. Once the system identifies such an attempt, all the front panel LEDs will flash rapidly and the unit will become useless by shutting off connection with all attached PCs and peripherals disabling any functionality.
USER GUIDE INSTALLATION SYSTEM REQUIREMENTS 1. 2. Black Box Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running operating systems such as Windows® or Linux.
USER GUIDE INSTALLATION Single-Head Units: 1. 2. 3. 4. 5. 6. 7. 8. 9. Ensure that power is turned off or disconnected from the unit and the computers. Use a DisplayPort™ cable to connect the DisplayPort output port from each computer to the corresponding DisplayPort IN ports of the unit. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. Optionally connect a stereo audio cable (3.5mm to 3.
USER GUIDE INSTALLATION (Continued) Multi-Head Units: 1. Ensure that power is turned off or disconnected from the unit and the computers. 2. Use DisplayPort™cables to connect the DisplayPort output ports of each computer to the corresponding DP IN ports of the unit. For example, if using KVS4-4004VX the four DisplayPort ports of one computer must all be connected to one channel.
USER GUIDE INSTALLATION (Continued) DP OUT D DP IN4 D DP IN3 D DP IN2 D DP IN1 D DP OUT C DP IN4 C DP IN3 C DP IN2 C DP IN1 C DP OUT B DP IN4 B DP IN3 B DP IN2 B DP IN1 B DP OUT A DP IN4 A DP IN3 A DP IN2 A DP IN1 A CONSOLE K/M 12VDC AUDIO IN-4 AUDIO IN-3 K/M CAC AUDIO IN-2 K/M CAC AUDIO IN-1 K/M CAC AUDIO K/M CAC CAC KVS4-4004VX DP IN USB IN CAC IN AUDIO OUT USB OUT CAC OUT DP OUT AUDIO IN Figure 1-6: KVS4-4004VX DP OUT B DP IN2 B DP IN1 B DP OUT A DP IN2 A
USER GUIDE INSTALLATION (Continued) EDID Learn: Factory default video EDID is set to HP (1080P max resolution) to allow initial operation with most of the DP display brands. For security reasons, EDID learn of most DP displays’ brands can be achieved only by Authenticated Administrator. Use the following steps to properly set up your EDID learning: 1. 2. 3. 4. 5. 6. 7. 8. Ensure power is disconnected or turned off from both the unit and the computer.
USER GUIDE CAC (COMMON ACCESS CARD, SMART CARD READER) INSTALLATION INSTALLATION The following steps are intended for the system administrator or IT manager only. If you have the optional CAC ports there will be 2 ports on a 2-host-port Secure KVM Switch and 4 ports on a 4-host-port Secure KVM Switch. CAC connection to the computer requires a USB cable connection separate from the keyboard and mouse. This allows the CAC to be connected independently from the keyboard and mouse.
USER GUIDE AUDITING: Dumping the Event Log via User Menu Options The following steps are intended for the system administrator. Note: Only one computer connected to port 1 is required for this operation. The Event Log is a detailed report of critical activities stored in the Secure KVM Switch or Secure KVM Switch memory. A comprehensive feature list and guidance for Administration and Security Management Tools can be found in the Administrator’s Guide available for download from: https://www.blackbox.
USER GUIDE LED’s BEHAVIOR User Console Interface – Display LED: # Status Description 1 Off Monitor is not connected 2 On Monitor is connected 3 Flashing EDID problem – Learn EDID to fix the problem User Console Interface – CAC LED: # Status Description 1 Off CAC is not connected 2 On Authorized and functional CAC is connected 3 Flashing Non-CAC peripheral is connected Front Panel – Port Selection LEDs: # Status Description 1 Off Non-selected port 2 On Selected port 3 Flashi
USER GUIDE SYSTEM OPERATION Front Panel Control To switch to an input port, simply push the desired input button on the front-panel of the Secure KVM Switch. If an input port is selected, the LED of that port will turn on. An open session is terminated upon switching to a different computer. TROUBLESHOOTING No Power • Make sure that the power adapter is securely connected to the power connector of the unit. • Check the output voltage of the power supply and make sure that the voltage value is around 12VDC.
USER GUIDE LIMITED WARRANTY STATEMENT A. Extent of limited warranty Black Box warrants to the end-user customers that the product specified above will be free from defects in materials and workmanship for the duration of 36 months, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. Black Box limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any: a.
USER GUIDE DISCLAIMER Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation may revise this document at any time without notice. TRADEMARKS Black Box and the Black Box logo type and mark are registered trademarks of BB Technologies, Inc.
