Specifications

5
BLACK BOX
®
White
with
5th black
diamond
For more information and our online store, visit www.blackbox.nl
Factory Floor
Making the connection to industrial serial devices.
Fiber Optic Cable
4 km
DIN Rail RS-232/
RS-485↔Fiber Driver
(MED100A)
Time Clocks
DB9 Serial Interface Cable
(BC00200)
Individually Shielded
Low-Capacitance Cable
(ERN24A)
RS-422/RS-485
DIN Rail
Repeater with
Opto-Isolation
(ICD102A)
DIN Rail 12-VDC
Power Supply
(PSD100-R2)
DIN Rail 12-VDC
Power Supply
(PSD100-R2)
RS-232↔RS-422/
RS-485 DIN Rail
Converter with
Opto-Isolation
(ICD100A)
Individually
Shielded
Low-Capacitance
Cable (ERN24A),
Workstation
DIN Rail RS-232/
RS-485↔Fiber
Driver (MED100A)
Remote Site
Up to 1200 meter away
Individually Shielded
Low-Capacitance Cable
(ERN24A)
Individually Shielded
Low-Capacitance Cable
(ERN24A)
LBH100A-H-ST-12
Hardened Media Converter Switch, 10/-100-Mbps
Copper to 100-Mbps Multimode Fiber, 12-VDC, ST
Media conversion for tough environments.
• Operating temperature range of
-25 to +60° C.
• Has one 100-Mbps fiber port and
two 10-/100-Mbps switch ports.
• Mounts on DIN rails with optional
brackets or you can rackmount up
to 16 units in the optional trays.
• Available in standard, hardened,
and extreme versions with a wide
range of fiber and power options.
See more at blackbox.nl.
Item Code
Hardened Media Converter Switch, 10/-100-Mbps Copper to 100-Mbps
Multimode Fiber, 12-VDC, ST LBH100A-H-ST-12
DIN Rail Mounting Bracket DIN-RAIL MC2
Powered Rackmount Tray LH1505P-RACK
DIN rail is an industry-standard metal rail, usually installed inside
an electrical enclosure, which serves as a mount for small
electrical devices specially designed for use with DIN rails. These
devices snap right onto the rails, sometimes requiring a set screw,
and are then wired together. Many different devices are available
for mounting on DIN rails: terminal blocks, interface converters,
media converter switches, repeaters, surge protectors, PLCs,
fuses, or power supplies, just to name a few.
A standard DIN rail is 35 mm wide with raised-lip edges, its
dimensions outlined by the Deutsche Institut für Normung, a
German standardization body. Rails may be cut for installation.
Depending on the requirements of the mounted components,
the rail may need to be grounded.
Item Code
DIN Rail, 1-m DR100
DIN Rail
5
BLACK BOX
®
White
with
5th black
diamond
For more information and our online store, visit www.blackbox.nl
Serial servers
Serial servers enable you to use your network to connect
to serial devices even over very long distances—as far as
your network stretches. It’s even possible to control serial
devices across the Internet. Serial servers act as virtual
serial ports by providing the appropriate connectors for
serial data and also by grouping serial data in both
directions into Ethernet TCP/IP packets. This enables you
to control serial devices across Ethernet without the need
for software changes.