Specifications

ManualsBrandsBlack Box ManualsData Input DevicesKV9604A

KV9604A

4-Port ServSwitch DT Series

USB/DVI/Audio KVM Switch

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Summary of content (19 pages)

PAGE 1
KV9604A 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switch CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
PAGE 2
PAGE 3
FCC AND IC RFI STATEMENTS FEDERAL COMMUNICATIONS COMMISSION and INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4.
PAGE 5
NOM STATEMENT 4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato. 14.
PAGE 6
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH TRADEMARKS USED IN THIS MANUAL BLACK BOX, the Double Diamond logo, and ServSwitch are trademarks or registered trademarks of BB Technologies, Inc. IntelliMouse, Microsoft, Windows, Windows NT, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
PAGE 7
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCHCONTENTS Contents Chapter Page 1. Specifications .......................................................................................................... 6 2. Overview .................................................................................................................. 7 2.1 Introduction .................................................................................................... 7 2.
PAGE 8
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 1. Specifications Hotkeys: No Resolution: 1600 x 1200 @ 60 Hz Supported Operating Systems: Windows® 98 SE/Me/2000/XP, and Windows Vista™ User Controls: (4) port buttons (labeled 1–4) also used for Scan time buttons and AutoScan, (1) function button Connectors: (1) Power; Console end: (1) DVI-I, (4) USB Type A, (2) 3.
PAGE 9
CHAPTER 2: Overview 2. Overview 2.1 Introduction The 4-Port ServSwitch USB/DVI/Audio KVM Switch allows you to control up to four computers from a single IBM® console (USB keyboard, USB mouse, and DVI [Digital Visual Interface] monitor, plus audio). Supported mice include Microsoft® IntelliMouse® and other mice. Setup is fast and simple, and there’s no software to configure. Its small desktop footprint is ideal for on or under your desktop.
PAGE 10
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 2.2 Components 2.2.1 FRONT PANEL Figure 2-1 shows the 4-Port ServSwitch front view. Table 2-1 describes the components numbered in the illustration. Figure 2-1. The 4-Port ServSwitch front-panel view. Table 2-1. Front-panel components. Component Description Port selection buttons Press buttons 1–4 individually to select a computer.
PAGE 11
CHAPTER 2: Overview 2.2.2 REAR PANEL Figure 2-2 shows the 4-Port ServSwitch rear view. Table 2-2 describes the components numbered in the illustration. 11 12 11 11 11 Figure 2-2. The 4-Port ServSwitch back-panel view. Table 2-2. Rear-panel components. Component Description Power connector Connects to a 5-VDC, 2-A power supply.
PAGE 12
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 2.3 What’s Included The package should contain the following items. If anything is missing or damaged, please contact Black Box. • 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switch • (1) universal power supply, output: 5 VDC, 2 A • This user’s manual 2.
PAGE 13
CHAPTER 3: Installation 3. Installation 3.1 ServSwitch Placement The 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switch is small, portable, and designed to fit on a desktop.
PAGE 14
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 2. Connect your USB keyboard and USB mouse directly to the USB keyboard and mouse ports (labeled with keyboard and mouse symbols) on the back of the ServSwitch as shown in Figure 3-1. Attach your DVI cable from your monitor directly to the DVI port. Then connect the speakers and microphone to the console’s audio ports.
PAGE 15
CHAPTER 3: Installation 3.2.2 CONNECTING THE COMPUTERS Using the all-in-one DVI cable (EHN900024U-0006 or -0010), connect a computer to the ServSwitch. Connect the cable’s USB connectors to the computer’s USB port. Connect the cable’s DVI-I connector to your computer’s DVI-I monitor port as shown in Figure 3-2. Connect the USB and DVI-I connectors on the other end of the cable to the ServSwitch. Follow the same procedure to connect the other computers.
PAGE 16
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH 4. Operation 4.1 Powering Up the System Once all cables have been connected and all computers have been powered on, the ServSwitch emulates mouse and keyboard signals on each port, allowing your computer to boot normally. The ServSwitch is now ready for use. 4.2 Selecting Computers Using Front-Panel Buttons You can instantly select any computer by pressing the port selector buttons on the front panel.
PAGE 17
CHAPTER 3: Installation To select the audio signal from any of the connected computers’ four ports, press the Function button in combination with the other push buttons as described below. 1. Press and hold the Function button.
PAGE 18
4-PORT SERVSWITCH DT SERIES USB/DVI/AUDIO KVM SWITCH Appendix. Troubleshooting A.1 Calling Black Box If you determine that your 4-Port ServSwitch DT Series USB/DVI/Audio KVM Switch is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box at 724-746-5500. Before you do, make a record of the history of the problem.