® ® NETWORK SERVICES KVTA170UK-16 KVTA171UK-16 KKVTA174UK-16 ServView CX Rack Tray Compact and easy access to up to sixteen server systems from a single rack slot. Combined screen, keyboard, mouse and sixteen port KVM switch all housed within a neat fold-up industry standard 1U rack slot. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S.
ServView CX Rack Tray Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks, and ServView is a trademark, of BB Technologies, Inc. Mac is a registered trademark of Apple Computer, Inc. Linux is registered trademark of Linus Torvalds. Windows is a registered trademark of Microsoft Corporation. NetWare is a registered trademark of Novell, Inc. Sun is a trademark of Sun Microsystems, Inc. Unix is a registered trademark of UNIX System Laboratories, Inc.
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
ServView CX Rack Tray Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. T odas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben ser seguidas. 5.
Table of Contents Contents 1. Specifications............................................................................................................................................................................... 6 2. Introduction................................................................................................................................................................................ 7 2.1 What‘s Included............................................................................
ServView CX Rack Tray 1. Specifications Approvals: CE, FCC Software Compatibility: Operates with all known software and operating systems including Windows®, Linux®, Unix®, BSD, all Sun® OS, all Mac® OS, NetWare®, etc. Operating Temperature: 32 to 104°F (0 to 40°C) Power: Page 6 DC jack (power adapter included) Input: 100–240 VAC, 50/60 Hz Output: 12VDC, 60W 724-746-5500 | blackbox.
Chapter 2: Overview 2. Introduction Thank you for choosing the Black Box ServView CX Rack Tray which combines screen, keyboard, mouse and sixteen port KVM switching while occupying only a single rack slot. The screen and keyboard slide out to provide quick access to all systems when working in the server room. All models also facilitate either remote or global access for authorised users who are away from the server room.
ServView CX Rack Tray 2.1 What‘s Included Your package should include the following items. If anything is missing or damaged, contact Black Box at 724-746-5500 or info@blackbox.com. • ServView CX rack tray assembly • Left and right mounting brackets • 8 x screws and cup washers • 6 x cage nuts • Power adapter and power cord • CD-ROM containing this user manual in PDF format • Safety leaflet - Please carefully read this leaflet. Page 8 724-746-5500 | blackbox.
Chapter 2: Overview 2.2 Additional Items You May Need • Server Access Modules: PS/2-style - Analog video, PS/2-style keyboard and PS/2-style mouse. Part code: KV1400A. USB - Analog video, USB keyboard and mouse. Part code: KV1401A. Sun - Analog video, Sun keyboard and mouse plus 3.5mm audio jack. Part code: KV1404A. Console SAM - (for KVTA174UK-16 only) D-sub 9-way female. Part code: KV1407A. 724-746-5500 | blackbox.
ServView CX Rack Tray 3. Installation 3.1 Suitable mounting locations • It is very important to locate the ServView CX Rack tray in a suitable environment. • The surface for placing and fixing the rack tray should be stable and level, or mounted into a suitable cabinet. • Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. • Position the rack tray with respect to related facilities. 3.
Chapter 3: Installation 3 Insert the rack tray assembly into the mounting brackets. See Figure 3-2. Figure 3-2. Inserting the rack tray. 4 Pull and hold the left and right black arrow buttons on the rails. 5 Return the LCD keyboard drawer to park position. 6 Use the remaining two M6 screws and cup washers to fix the front mounting ears of the rack tray assembly to rack rails. See Figure 3-3. Figure 3-3. Securing the rack tray. 7 Tighten all eight M6 screws to complete the installation.
ServView CX Rack Tray 3.3 Connecting the rack tray All server, network and power connections are located at the rear of the unit. 3.3.1 The EXTernal link (network or remote user) The single RJ-45 socket labeled as EXT is used to allow either global or remote users to login and control connected servers.
Chapter 3: Installation 3.3.2 Server access module links There are sixteen RJ-45 sockets labeled as COMPUTER CONNECTIONS on the rear panel. Each socket supports a CAT 5, 5e or 6 link to an individual server system. Note: The maximum length of the SAM cable can be up to 10 metres (32 feet). For model KVTA170UK-16, also ensure that the overall distance between a remote user (connected to a remote extender) and any SAM unit/server does not exceed 300 metres (980 feet).
ServView CX Rack Tray 3.4 Power Connection The KVM module is provided with a power adapter capable of supplying the display monitor, keyboard and KVM module. IMPORTANT: You must only use the manufacturer approved power adapter with the KVM module. IMPORTANT: Due to the length of the power cable, if the rack tray is mounted high in the rack it may not be possible to place the power adapter at floor level.
Chapter 4: Configuration 4. Configuration 4.1 Initial Configuration The precise details for configuration of the KVM module will depend on the model being used.
ServView CX Rack Tray 5. Operation 5.1 Opening and closing the rack tray The compact rack tray is easy to open and close when required. 5.1.1 To open the rack tray 1 Press the button on the carry handle at the front of the rack tray unit and gently pull the carry handle towards you. See Figure 5-1. Figure 5-1. Press the release button and pull the rack tray. 2 Once the drawer is fully extended, lift up the carry handle to reveal the screen and keyboard. See Figure 5-2. Figure 5-2.
Chapter 5: Operation 5.1.2 To close the rack tray 1 Fold down the screen and locate the black arrow release button on each side of the drawer slider. See Figure 5-3. Figure 5-3. Locate the release buttons on each side. 2 Pull forward and hold the two black arrow buttons while slightly pushing the drawer slider in to release the locks. 3 Gently push the drawer slider all the way into the rack using the carry handle. Take care to keep your fingers away from the sliders. See Figure 5-4. Figure 5-4.
ServView CX Rack Tray 5.2 Operating the rack tray 5.2.1 The screen controls The screen controls are located at the base of the screen. See Figure 5-5. Figure 5-5. Screen controls. Power indicator. (green = on, orange = power saving mode). Power button for the screen. Display the OSD menu for the screen. Scroll buttons to control OSD menus for the screen. (To auto adjust screen, press and hold for 5 seconds). Exit the screen OSD menu.
Chapter 5: Operation 5.2.2 Using the OSD menu for the screen Press the button to display the OSD menu for the screen: The various sections within the screen menu are as follows: Image Controls for brightness, contrast, colour temp, red, green and blue. Geometry Controls for auto adjust, H position, V position, phase and clock. Not used Not used Misc Controls for language, OSD position, graphic mode, OSD time, ratio, reset and timer. 5.2.
ServView CX Rack Tray Appendix A. Safety Information • For use in dry, oil free indoor environments only. • Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth. • The unit is heavy. Therefore when installing, place the rack tray on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby. • Both the rack tray and its power supply generate heat when in operation and will become warm to the touch.
Appendices Appendix B. Screen specifications The following specifications apply to both screen sizes unless indicated otherwise: Maximum resolution Brightness Contrast ratio Viewing angle Display area 1280x 1024 300 Cd/m2 1000:1 160o x 160o 338 x 270mm (17” model) or 376 x 301mm (19” model) 724-746-5500 | blackbox.
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. ® ® NETWORK SERVICES About Black Box Black Box Network Services is your source for an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less.
