Service manual

Chapter 7
7-4
How to display the Service status
After the projector has entered to the factory mode, press the buttons,
[Return] and [Up] simultaneously. Then, the following display appears.
If it doesn’t appear, repeat from the beginning.
This mode maintains until you turn off the Main power switch.
FAN-1 is Z103 (Service part location No.). FAN-2 is Z102.
FAN-3 is Z104. FAN-4 is Z105. FAN-5 is Z101. FAN-6 is Z100.
Temp-1 is Intake temperature. Temp-2 is Exhaust temperature.
A number of Error log means an error ID.