User manual

OEM Device Configuration Guide
revision 3 — 47
10. LAN Connections
The following information can be used to configure communication for Apollo panels, Pyrotronics,
Stentofon, receivers, and Visonic over LAN connections.
10.1. Configuring a MSS1/MSS100 Ethernet Controller (BAS-
ETHLAN)
This Ethernet controller is a network device, and not a part of the UL certification. This device must have
transient protection.
(A NULL MODEM CABLE IS REQUIRED)
10.1.1 Establish Serial Communication with the ETHLAN:
Notes: BEST now has the controller-to-MSS100 or MSS1-T cable available, part number HOC-
ETHLAN.
UL requirement: This device must be on the recommended UPS (#HO2070) or equivalent
1. With the power ON to the ETHLAN devices, establish a serial connection from the ETHLAN to the
PC’s Serial Communication Port, for example, using the HyperTerminal. (A Null Modem cable is
required.)
2. Start HyperTerminal.