Manualshelf

User manual

ManualsBrandsBlack Box ManualsMedia ConverterIC108AE IC109C
31323334353637383940
Intelli-Check ID-Check
40 —
revision 3
8.1.2 Configure the Display
If the results do not need to be displayed on the terminal, disable this option to speed up the transaction time.
When a license is swiped or scanned, the IDC1400 will beep (if enabled) and transfer the data (if the printer
is enabled) and return back to the idle screen.
1. In the SETUP [F6] menu use the UP and DOWN arrows to scroll through the options. Select
FEATURES by pressing [Enter].
2. Scroll through and select DISPLAY TIME.
3. Set the DISPLAY TIME = 00.
8.2. B.A.S.I.S. Configuration
Before continuing, verify that you have a B.A.S.I.S. license with ID-Check Terminals enabled. The ability to
use ID-Check Terminals is a licensed feature. The ID-Check Terminals license is count-based; you are
licensed to have a certain number of ID-Check Terminals. The number of terminals you are licensed to use is
displayed in the “Maximum Number of ID-Check Terminals” setting in the ID CredentialCenter section of
the license.
The workstation to which the ID-Check scanner will be attached must be added in the B.A.S.I.S. software.
This is done in System Administration or ID CredentialCenter on the Workstations form.
The ID-Check scanner must also be added in the B.A.S.I.S. software. This is done in System Administration
or ID CredentialCenter on the Encoders/Scanners form in the Workstations folder. The encoder/scanner that
is added must have a Device Type of “ID-Check Terminal.”
Use FormsDesigner to map the proper DMV values to the data fields for enrollment.
The settings for the software must match the communication parameters configured on the IDC1400 unit.
Configure the communication parameters in System Administration as follows:
• BAUD RATE: 38400
• DATA BITS: 8 bit
• PARITY: None
•STOP BITS: 1
• FLOW CONTROL: None
8.2.1 Import Data Using the ID-Check Scanner
You can import data using the ID-Check Scanner whenever you are asked to manually enter cardholder or
visitor information. This includes adding, modifying, or searching for cardholder or visitor records. You can