User manual

OEM Device Configuration Guide
revision 3 — 33
6. Corex CardScan
These instructions are for installing and configuring either the Corex CardScan 300 or the Corex CardScan
600c.
6.1. Corex CardScan Installation and Configuration
1. Install the CardScan software on your PC. This must be done before connecting your scanner. To install
the scanner, refer to the Corex documentation.
2. Connect the AC adapter to the scanner. Plug the AC adapter into a power outlet.
3. Using the included USB cable, connect the scanner to the USB port on your PC.
4. Start the CardScan software and make sure that the business card scanner is functional. Note that after
the CardScan software has been run initially, it does not need to be running in order for the business
card scanner to work with the B.A.S.I.S. software.
5. Calibrate the business card scanner. Refer to the Corex documentation on how to calibrate the scanner.
6. In FormsDesigner, assign the vCard value to user-defined fields (UDF).
7. Use the business card scanner in the Cardholders folder in System Administration, ID CredentialCenter,
Digital Video, or Visitor Management.